We've got the Best Gift Ideas

- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

The EVOC Bite Valve is a mouthpiece for the drinking tube of your Hydration Bladder. - Self-closing silicone stream valve - Leak-tight seal against escaping liquid - Taste-neutral material for pure flavor

- High water flow TPR valve - Leak proof seal for safe transport - Phthalate and PVC free

- Extra-strong magnet keeps the drinking tube in position during your activity. - Two-piece design for attachment to the hip belt, backpack or vest - Fits all EVOC hydration systems (excluding insulated drinking tubes)

evoc Medium Socks

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug

Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.

- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs

Straight pull spokes and nipples from Zipp

Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.

Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.

Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened

Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.

Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.

- Bar end plugs are vital for any bike. - The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets

Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. - 100% Silicone weather resistant material - Plastic bar end plugs - 5mm thick

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Compression plug for Wolf Tooth headsets. - Compression plug works with steerer tube inner diameters ranging from 23.2mm to 24.2mm

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum

These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length. - Designed for M8 x .75 thread pitch - 10mm long - 4mm hex head - Bolt length is laser engraved onto the bolt head for easy length identification - 6-7 Nm installation torque with light grease on threads only

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

The Willworx ‘CONNECTORS’ allows the individual Superstands to be connected in an unlimited number of configurations to suit every bicycle shop layout, size, and display area. They can be staggered to the right or left, side by side, back to back, etc. Some of the configurations are shown here. The CONNECTORS also allow the Superstands to be adjusted closer or further apart, as required for some bicycles with wider handlebars, or to position the bicycles closer where minimum floor space is available. Parking the bicycle with the rear wheel and staggered allows more bicycles to be on display.

- Add to older versions of the SuperStand to extend height to accept 29er wheels

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

White Lightning's Chain Johnny solves the problem of how to transport and store your bike with the possible greasy mess. The Chain Johny uses a 2-ply rubber and nylon case with Velcro closures to slip over your drivetrain so the mess stays inside. Never worry about leaving greasy chain marks or tearing your upholstery again.

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

Safely stash tools, treats, keys, and other personal items in the Whisky Parts Co. It's the '90s Keg, featuring can't-miss-it color and an easy screw-down top. - Keeps frequently needed items secure and dry - 16 oz.

No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves

Pusher for Wheels Mfg sealed bearing extractors. - For use with Wheels Mfg. 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 20 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.5mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Road 400 CX Front - HB-RM40 Front - Shimano HB-RM40 Front - HB-RA50 Front

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.6mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Shimano HB-C201 Front - 105 HB-1050 Front - Deore LX/Mtn LX Front - STX HB-MC32/30 Front - Shimano HB-A410, HB-A416 Front

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech, Joy U, KK 10mm x 1, rear - Compatible with 10mm x 1 axle - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Joytech, Joy U, KK 10mm x 1, rear - Taiwanese rear hubs with 10mm x 1 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Sovos 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - Sovos 9mm x 1, front hub - Taiwanese and similar front hubs with 9mm x 1 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Right Cone - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 12.5mm - Cone Wrench Size: 15mm - 1 cone per bag COMPATIBLE HUBS: - Sora FH-3300, 9-spd Rear