We've got the Best Gift Ideas

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°

- Weight: 220g  - Body: NEP Injection-Molded - Spindle: Cromoly  - Bearings: 3 Cartridge - Springs: SWP  - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)

Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage

XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.

Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.

Low-cost dual carrier with NEW Italian-made cages. Featuring 60% more grip force with an 8lb bottle grip. Includes 2 saddle mounts & 2 Xenon cages. Does not include bag. - Dual bottle system tucks neatly behind your saddle for easy access to hydration - NEW upgraded Italian-made, Xenon cages increase cage grip force by 60% over original model - Mounts low to not hinder your ability to get on and off the bike - First-time rear hydration system buyer? Mounts with a single screw for no-fuss install so you can self-install and quickly get on the road Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping Xenon cages tout an 8lbs grip force (approx) – within the ideal range of rear system grip force for worry-free bottle retention Easy storage upgrades readily available - Add an XLAB Mini Bag – a compact storage bag that sleekly mounts between the cages! - Mini Bag easily fits all the essentials for a clincher repair kit – 1 tube, XLAB Air Strike CO2 cartridges, patch kit, XLAB inflator and tire levers - Includes: 2 Mini Wing Cage mounting brackets and 2 XENON Cages - Color: Silver mounting brackets with black cages - Material: 6061-T6 Aluminum mounting brackets. Nylon composite cages. - Cage Grip Force: 8lbs (3.6 kg) approx - Weight: 186g - Warranty: 3 Year Limited Warranty

Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages

XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.

Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty

Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

The 102BCD chainring was made specifically for the XTR M960 crankset - Only fits on the M960 crankset in the middle ring position - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings only fit on the M960 crankset in the middle ring position - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - 6mm chainring bolts needed - Chainline: 50mm - Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, try using a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck Tech Specs: - Weight: 32t/47g - Material: 7075-T6 aluminum

Featuring the proprietary mud clearing Drop-Stop tooth design, these rings are designed to fit any 104 BCD crankset. Made in Minneapolis, MN with exceptional chain retention in mind, these chainrings are best paired with a clutch-style rear derailleur. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. - Fits 110 BCD Asymmetric 4-bolt Shimano cranks - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Fits 110 BCD asymmetric 4-bolt cranks - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36t chainring is NOT compatible with these cranks. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Size 42t and larger will work with the Dura Ace 9100 power meter - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline 47.5mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop. Compatibility: - Shimano GRX cranksets including RX600 and RX810 - Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains - Drop-Stop B tooth profile is compatible with SRAM Flattop chain - Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Fits 110 BCD 5 arm cranksets Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 110 BCD 5-arm cranksets. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. - Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Recommendations - Recommend the use of a clutch-style rear derailleur for the best chain security. - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! - Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 34t/44g | 36t/58g | 38t/66g | 40t/74g | 42t/81g | 44t/90g | 46t/107g | 48t/115g | 50t/125g - Material: 7075-T6 aluminum - Made in the USA

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 130 BCD 5-arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. Tech Specs: - Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g - Material: 7075-T6 aluminum - Made in the USA - This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup. - Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA 7075 T6 Aluminum

The Wolf Tooth 76 BCD chainrings work great on any 76 BCD spider or crankset. These will replace the more expensive rings used on SRAM XX1 spiders or other manufacturer's spiders such as Cannondale. Also a great fit on the Specialized Stout crankset. - Fits any 76 BCD crankset or spider - Drop-Stop® technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Note - Use standard M8 chainring bolts, not the M8.5 bolts included with XX1 spiders. Our patented Drop-Stop tooth design provides superior chain retention, wear life and mud-shedding capability. Compatibility: - These rings fit any SRAM 76 BCD spider or Specialized Stout crankset. Here are instructions on how to measure your BCD. - Threaded for standard M8 chainring bolts. For the XX1 spider, we recommend the 6mm bolts (or any short M8 chainring bolt). For the Stout crankset we recommend the 10mm bolts or the bolts that come with the crankset. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. Recommendations If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck Tech Specs: - Weight: 30t/45g | 32/51g - Material: 7075-T6 aluminum - Made in the USA

8-Bit System is a multi-function tool that regroups all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

This 94 BCD 5-bolt ring will serve all your Vintage crankset and Surly OD crankset needs. - Fits any 94 BCD 5-bolt crankset (modification may be needed) - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Four of the holes are threaded and one is a normal through bolt hole (done for Surly compatibility). Use a stock 10mm chainring bolt for the fifth, hidden arm. - These rings fit any 94 BCD 5 bolt crankset (possible alterations needed to fit some crankarms) - For Plus size bike applications with the Surly OD crankset, e.g. Instigator and Krampus, you will need to use the stock spacers (Spacer Kit QBP Part number CR8609) that came with your 1x setup. You will also need some 16mm bolts which can be purchased from Problem Solvers. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provides a great chainline on most boost bikes. - Chainline (approximate as BB centering and cranksets vary) DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. Recommendations If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 28t/37g | 30/48g | 32t/57g - Material: 7075-T6 aluminum - Made in the USA

Looking for a SRAM XO1, X1, GX, and NX chainring with the proven chain retention of our patented Drop-Stop® chainrings? Wolf Tooth has what you need in these beautifully machined 94 BCD bolt-on chainrings. - Fits any 94 BCD SRAM crankset - Drop-Stop® technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit any SRAM mountain bike crankset with a 94 BCD. Note that we also offer SRAM direct mount chainrings for standard, boost and BB30 short spindle cranksets and some stainless steel versions. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49mm - Provides a great chainline on most boost bikes. Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30t • 44g | 32t • 54g | 34t • 63g - Material: 7075-T6 aluminum - Made in the USA - US Patent 958123

This is a 96mm BCD chainring for a 1X chainring for XTR M9000 crankset with the proven chain retention of our Drop-Stop® chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline. - Fits 96 BCD XTR M9000 and M9020 cranksets - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7x.75) - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm. Note - The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets. Compatibility: - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets - Not compatible with Deore triple (3x) cranksets - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most Boost bikes. See this explanation for details. - Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm - Drop-Stop ST models will have the same chainline as the Shimano specified chainline - 10mm bolts are optimized for mounting this ring - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

Looking for a 1X chainring for your Shimano compact triple crankset - models M782, M672, M622, or M612 – with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in this beautifully machined chainring with threaded standoffs that proved and ideal chainline. - Fits any 96 BCDShimano Symmetric 4-bolt crankset - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit any 96 BCD Shimano Symmetric bolt pattern crankset, and here are instructions on how to measure your BCD. - Compatible with the following Shimano crankset models: M782, M672, M622, M612 - Not compatible with XTR M9000 or XT M8000 - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49mm. Provides a great chainline on most boost bikes. Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g - Material: 7075-T6 aluminum - Made in the USA

- Bar end plugs are vital for any bike. - The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.

Light, strong with extra tall teeth, the Wolf Tooth Aluminum Single Speed Cog is a lightweight option for single speed cogs that's offered in a variety of sizes. - Wide 4.5mm base won't dig into your freehub - Made of 7075 Aluminum Alloy for durability and lightness - Made in the USA